http://cad-feladatok.c3d.hu/dw00/ 2026-05-13T15:24:17+02:00 http://cad-feladatok.c3d.hu/dw00/ http://cad-feladatok.c3d.hu/dw00/lib/tpl/default/images/favicon.ico text/html 2016-05-27T16:00:01+02:00 http://cad-feladatok.c3d.hu/dw00/doku.php/en:creo:cr1:010_vazlat:cr1_010_010_vazlat?rev=1464357601&do=diff Datum/Sketch Data FRONT (Datum Plane) text/html 2016-05-27T16:03:56+02:00 http://cad-feladatok.c3d.hu/dw00/doku.php/en:creo:cr1:010_vazlat:cr1_010_020_vazlat?rev=1464357836&do=diff Setup/References Setup/Sketch View Data RIGHT (Datum Plane) TOP (Datum Plane) Comments The get the sketch windows parallel with the display plane click on Sketch View button. text/html 2016-06-15T20:45:23+02:00 http://cad-feladatok.c3d.hu/dw00/doku.php/en:creo:cr1:010_vazlat:cr1_010_030_vazlat?rev=1466016323&do=diff Sketching/Line Sketching/Arc Important! To cancel the drawing you need to click with the middle mouse button. With the press you get to selecting mode. Comments You don't need to dimension the lines and the arc of the sketch, it is enough to be drawn proportional to the final form. text/html 2016-06-15T20:46:01+02:00 http://cad-feladatok.c3d.hu/dw00/doku.php/en:creo:cr1:010_vazlat:cr1_010_040_vazlat?rev=1466016361&do=diff Editing/Modify Data L: 180 mm Comments Firstly pick all the dimensions with the mouse block. Next click on Modify than in the window of the command choose the Lock Scale option. Find the largest/widest dimension in the window and type in 180. After pressing the enter all dimensions will be scaled. text/html 2016-06-15T20:46:51+02:00 http://cad-feladatok.c3d.hu/dw00/doku.php/en:creo:cr1:010_vazlat:cr1_010_050_vazlat?rev=1466016411&do=diff Sketching/Line Sketching/Arc Editing/ Delete Segment Comments After you have drawn the slant line and the connecting arcs, the sketch loses it's orange filling color. This indicates that the area is not a closed with one continuous line. At the end of the new lines two small dots appear which warns about the problem. With Delete Segment command you can delete the unnecessary lines by continuous click and drag with the left mouse button. In this way the sketch will be fully defined aga… text/html 2016-06-15T20:47:53+02:00 http://cad-feladatok.c3d.hu/dw00/doku.php/en:creo:cr1:010_vazlat:cr1_010_060_vazlat?rev=1466016473&do=diff Sketching/Circle Constrain/Tangent Constrain/Parallel Important! In the right upper corner the circle must be concentric with the round at the corner! Comments If necessary at the connection points between the previously drawn slant line and arc must be set up as parallel and tangential subsequently. text/html 2016-06-15T20:48:16+02:00 http://cad-feladatok.c3d.hu/dw00/doku.php/en:creo:cr1:010_vazlat:cr1_010_070_vazlat?rev=1466016496&do=diff Sketching/Fillet Comment If you want to create a round on a part model it is not advisable to draw it in the sketch, instead it is better to create as a separate feature in the model. text/html 2016-06-15T20:49:12+02:00 http://cad-feladatok.c3d.hu/dw00/doku.php/en:creo:cr1:010_vazlat:cr1_010_080_vazlat?rev=1466016552&do=diff Dimension/Normal Constrain/Equal Data L 180 mm L 80 mm A 110° R 70 mm L1-L1 constrain Important! If you don't want the created dimensions to be locked (marked with red color), than in the >File >Options >Favorites menu you have to deselect the sketcher_lock _modfied_dims option. Comment The dimensions can be applied after clicking on the drawing elements (e.g.: line, point-point, etc.) with the middle button. The type of the dimension is depend on the type of the drawing element and … text/html 2016-05-27T21:19:32+02:00 http://cad-feladatok.c3d.hu/dw00/doku.php/en:creo:cr1:010_vazlat:cr1_010_090_vazlat?rev=1464376772&do=diff Dimension/Normal Constrain/Equal Data L 20 mm L 10 mm D 20 mm R1-R1 constrain Important! If it is necessary, then the radius of the circle and the arc in the lower right corner has to be constrained to be equal. text/html 2016-06-15T20:58:08+02:00 http://cad-feladatok.c3d.hu/dw00/doku.php/en:creo:cr1:010_vazlat:cr1_010_100_vazlat?rev=1466017088&do=diff Sketching/Centerline Sketching/Rectangle Sketching/Arc Dimension/Normal Constrain/Symmetric Data L 50 mm L 25 mm L 90 mm L 15 mm symmetry constrain Important! For the symmetry constrain a center line has to be drawn created with the >Sketcher >Centerline command and NOT with the Datum Centerline. With the Geometry center line an auxiliary axis is created in the body model. If we want to protect the dimensions from the accidentally modifications, then with the Lock option… text/html 2016-05-27T16:00:25+02:00 http://cad-feladatok.c3d.hu/dw00/doku.php/en:creo:cr1:010_vazlat:start?rev=1464357625&do=diff 010_vazlat index