Trace: • Flange extrude • Creating the casted part • Chamfer • Casting rounds I. • Cast round VII. • Copying the core's surfaces • Casting round III. • Subtracting the core • Creating the inlets for the bolt threads

hu
en

Creating the inlets for the bolt threads

Model / Shapes
Extrude

Data

V = 5 mm
L = 25 mm

Important!

In the sketch the contour is enlarged with 5 mm for the proper wall thickness.

Comment

These extrudes are for the inlet of threads which holds the housing in place.

en/creo/cr1/520_bordas_tengely/cr1_520_140_bordas_tengely.txt · Last modified: 2016/06/02 19:26 by