Trace: • Flange extrude • Cast round IV. • Extrude of the main body • Cast round V. • Casting round III. • Sand core model • Copying the threaded blind holes • Machining the casted part • Geometric rounds I. • Extruding the hole former

hu
en

Extruding the hole former

Model / Shapes
Extrude

Data

L = 200 mm
Symmetric

Important!

The upper sketch line is coincident with the elevated plane. The sketch contains the casting draft.

Comment

The crankshaft volume is extruded symmetrically. The cross section reduced with 3 mm for the casting allowance.

en/creo/cr1/520_bordas_tengely/cr1_520_030_bordas_tengely.txt · Last modified: 2016/06/02 19:11 by