[[
Machining the threaded blind hole
]]
CAD Feladatok
Trace:
•
Geometric rounds II.
•
Creating the casted part
•
Extruding the hole former
•
Geometric rounds I.
•
Machining the casted part
•
Copying the threaded blind holes
•
Sand core model
•
Casting round III.
•
Cast round V.
•
Machining the threaded blind hole
hu
en
Machining the threaded blind hole
Model/ Engineering
Hole
Data
D1 = M6 x 1
L1 = 20 mm
D2 = 8 mm
L2 = 18 mm
Important!
The shape of the hole can be defined in the Shape tab.
Comment
The hole has to be constrained to the auxiliary axis of the casted ear. The start plane is the top of the machined surface.
en/creo/cr1/520_bordas_tengely/cr1_520_330_bordas_tengely.txt
· Last modified: 2016/06/05 21:09 by